Solar Detach & Reset

Solar Panel Detachment & Roof Reset

Replacing a roof under solar panels takes coordination. We handle it end-to-end.

At Core Roofing Systems, we coordinate solar panel detach and reset with your original installer or a vetted Denver-area partner whenever a roof replacement is needed beneath an existing solar array. Your panels come off cleanly before the work begins and go back on perfectly aligned afterward — with your manufacturer warranty intact and your system recommissioned to full production.

Schedule a Consultation Roof Replacement Services

Read Reviews

Why Choose Core

Why Denver Homeowners Trust Core Roofing for Solar Detach & Reset

Core Roofing Systems crew coordinating a roof replacement under existing solar panels in Denver

Vetted partner network

We work with trusted Denver-area solar contractors who handle panel removal and re-installation per manufacturer spec. No DIY, no shortcuts.

Direct installer coordination

If your panels were installed by another company, we can coordinate directly with them — keeping your original manufacturer warranty intact through the work.

Single-project convenience

One schedule, one point of contact, one project window. No juggling separate contractors, no finger-pointing if something goes wrong.

Warranty preservation

Detach and reset is performed per panel-manufacturer guidelines so your solar warranty stays valid. We document each step for your records.

System recommissioning

After reset, the solar installer tests and recommissions the system to confirm full energy production before sign-off. You see the same kilowatt output you had before.

Photo documentation

Before and after photos of panel placement, wiring, and roof condition — protecting you if anything unexpected comes up later.

Get Started

Schedule a Free Solar Detach & Roof Replacement Consultation

Tell us about your roof and your solar setup. We’ll inspect the roof, evaluate the existing array, contact your panel installer (or recommend a partner), and put together a single coordinated quote that covers the full project.

Already know you need a full replacement? Start with our residential roof installation page for the broader replacement process.

Contact Us

Our Process

How Solar Detach & Roof Replacement Works Together

Core Roofing Systems coordinating solar panel detach during a residential roof replacement in Denver

01

Inspection & Solar Survey

We inspect your roof and document the existing solar array: panel layout, racking, conduit routing, inverter location, and system specs. We confirm whether a detach is necessary (vs. a partial workaround) and identify any preexisting conditions worth flagging before work begins.
02

Coordination With Your Solar Installer

We reach out to the original panel installer to coordinate the detach and reset. If they’re no longer in business or unavailable, we activate a vetted partner who can perform the work per manufacturer specifications — preserving your warranty and certifications.
03

Safe Panel Removal & On-Site Storage

Your solar contractor removes panels, racking, and any roof-mounted conduit. Wiring is properly disconnected, capped, and labeled. Panels are stored safely on-site in a covered staging area until the roof work is complete.
04

Roof Replacement

With the array detached, we replace the roof per your selected materials and specifications — following the same standards we use on every residential roof installation. Tear-off, deck prep, underlayment, ventilation, and new roofing all installed to manufacturer spec.
05

Panel Reset & System Recommissioning

Racking and panels are reinstalled on the new roof in their original layout (or an optimized layout if you’re adding panels). Your solar installer tests and recommissions the system, confirming voltage, output, and inverter handshake. You sign off with the same energy production you had before the project.

Customer Reviews

What Our Clients Say

Leave Your Review Read More

Core Roofing Systems coordinating solar panel detach prior to a residential roof replacement in Denver

Solar panels safely staged on-site during a Core Roofing Systems roof replacement in Denver

Solar array reset onto a newly installed roof by Core Roofing Systems in Denver

Have Questions?

Frequently Asked Questions About Solar Detach & Reset

Not when it’s done correctly. Panel detach and reset performed per manufacturer specifications preserves your warranty. That’s why we coordinate with your original installer (or a vetted partner) rather than removing panels ourselves — their licensed work keeps the manufacturer warranty intact and on the record.

Detach and reset is its own line item on the project quote, separate from the roof work. Pricing depends on the number of panels, the racking system, and which contractor performs the work. We’ll give you a clear breakdown up front so there are no surprises.

A typical solar-equipped roof replacement runs 4–7 working days: 1 day for panel detach, 2–4 days for the roof work depending on size and material, and 1–2 days for the reset and recommissioning. We schedule each phase back-to-back so the array is only off the roof for the minimum window.

Yes. We’ll reach out to your original installer first — they know your system best and keeping them in the loop preserves your warranty. If they’re unresponsive, no longer in business, or unable to schedule in your window, we have vetted Denver-area partners we can bring in to handle the work to the same standard.

The solar contractor performing the detach carries insurance and liability for the panels while they’re handling them. We document panel condition before removal with photos, so if something happens during the project, there’s a clear record. Damage during detach or reset is the responsibility of the solar contractor, not the homeowner.

Yes — panels are reset in their original orientation and angle, and the system is recommissioned to verify production matches pre-detach readings. If you want to optimize panel layout, change the inverter, or add more panels during the reset, your installer can quote that as an upgrade at the same time.

Yes — the roof being open is the ideal moment to expand an array if you’ve been considering it. Your solar installer can size additional panels and racking, and we’ll coordinate the new attachment points with the roof replacement so flashing and waterproofing are integrated from day one.

The roof replacement itself requires a standard residential roofing permit, which we pull as part of the project. Detach and reset of an existing array is typically covered by the original solar permit on file; your solar contractor handles any inspection or recommissioning paperwork required by the utility.

Older systems can still be detached and reset, though sometimes it’s worth a conversation about whether to upgrade panels or the inverter while the roof is open. Our partner installers can give you an honest opinion on whether your existing system is worth resetting or whether a partial upgrade makes more sense.

Old penetrations are sealed and integrated into the new roof system as part of the replacement. When the array is reset, new flashing is installed at every racking attachment point per shingle-manufacturer and solar-manufacturer specs — so the new roof is fully waterproof and ready to support the system for its full lifespan.

Homeowners reviewing roof financing options with a Core Roofing Systems estimator

Flexible Financing

Flexible Financing for Your Denver Roof Project

A new roof shouldn’t be the reason a family raids their emergency fund. We offer flexible financing options for qualified homeowners so you can move forward on the work your home needs without waiting for the perfect moment. We’ll walk through options during your estimate so you know exactly what the monthly cost looks like before you commit.

Flexible Payment

Options for full replacements and repair projects.

Quick Approval

Simple application with fast decisions.

No Penalties

No prepayment penalties, ever.

Competitive Rates

Low rates for qualified homeowners.

No Hidden Fees

Clear, written terms before any work begins.

We Handle It

Paperwork handled in person with your estimator.

Apply for Financing

Our Service Areas

Denver Metro Roofing Service Area

We serve homeowners, property managers, and commercial clients across the entire Denver Metro region. Below are the communities where we work every week:

Map of Denver Metro communities served by Core Roofing Systems

Aurora

Englewood

Lafayette

Lakewood

Evergreen

Louisville

Parker

Arvada

Morrison

Centennial

Boulder

Commerce City

Broomfield

Westminster

Genesee

Highlands Ranch

Greenwood Village

Erie

Castle Pines

Brighton

Northglenn

Lone Tree

Windsor

Thornton

Cherry Hills Village

Cherry Creek

Wheat Ridge

Serving Central Denver

Not sure if you’re in our service area? Call 303-295-2220 — and find out how we can help you.

303-295-2220 See All Service Areas

Doing It Right Matters

Ready to Replace a Roof Under Solar?

Solar makes a roof project more complicated, but it shouldn’t make it stressful. We coordinate detach, replacement, and reset as a single project — one quote, one schedule, one team accountable to you. Your panels come off cleanly, your roof is replaced to manufacturer spec, and your system is back online producing the same energy it always did.

“Doing It Right Matters.”

Schedule Your Consultation Call 303-295-2220

Solar Panel Detachment & Roof Reset